SKU:

Total Grow Control Peristaltic Pump

Total Grow Control Peristaltic Pump

Chemical solution and slurry metering pumps designed, engineered, and built to last. The pump case is molded of a rugged, chemical resistant ABS. Mounting pads and a built-in wall mounting bracket allow a choice of flat surface or wall mounted installation.
 
The thermal or impedance protected gear motor is safe, quiet and dependable. All metal gearing parts are heat-treated and the output shaft is supported by heavy-duty bearings.
  
The feeder head is molded of UV and acid resistant polycarbonate and is designed to snap on and off without tools.
 
A 10-minute solid-state electric current interrupter is a standard feature, built into every MEC-OMATIC Dolphin Series pump.
  
Technical Specs
  • Item: Chemical Metering Pumps 
  • Chemical Metering Pump Type Peristaltic 
  • Max. Flow (gpd): Pumps 60.00 gpd 
  • Max. Pressure: Pumps 25 psi 
  • Voltage: Pumps 115VAC 
  • Max. Viscosity: Pumps 300 cP 
  • HP: Pumps 1/60 
  • Phase: Pumps 1 
  • Flow Rate Output Control Adjustable 
  • Tubing Material: Peristaltic Pumps Norprene 
  • Turn Down Ratio: Pumps 10:1 
  • Reproducibility: Pumps +/-2.0% 
  • Self-Priming: Yes 
  • Suction Lift 24 ft. 
  • Head and Fitting Material: Pumps Resin 
  • Body Material Polycarbonate 
  • Motor RPM 50 
  • Height 5-5/8" 
  • Length 7-5/8" 
  • Width 6-7/8" 
  • Number of Feeds 1 
  • Cord Length 6 ft. 
  • Min. Flow Rate 6 gpd 
  • cc/Min. 157.6 
  • Max. Strokes per Minute 50 
  • Hz 60 
  • Standards ETL, cETL, ETL Sanitary 
  • Features valve-less, non-clogging design

Features 
  • Feed rates from 13 gpd (2.05 lph) to 97 gpd (15.3 lph) at 25 psi (1.72 bar).
  • Pump case is molded chemical resistant ABS. 
  • Thermal or impedance protected gearmotor is safe, quiet and dependable. 
  • All metal gearing parts are heat-treated. 
  • Output shaft is supported by heavy duty bearings. 
 
Operating Benefits 
  • Quick-release, twist-off, clear polycarbonate, acid resistant head.   
  • Self-lubricating chemical resistant roller assembly.  
  • Durable, long-lasting tubing with no tube adjustment.  
  • Heavy duty shaded pole gearmotor with lifetime lubrication.
 
Engineering Data
  • Pump Head Materials: Chemical Resistant Resin 
  • Pump Head Tubing: Synthetic Rubber 
  • Injection Fitting (standard w/check valve): PVC 
  • Strainer: FPP 
  • Tubing: PE
  • Pump Housing:   Chemical Resistant Resin
  • Important: Material Code - PVC=Polyvinyl Chloride, PE=Polyethylene.
  • Power Input: 115 VAC/60 HZ
$394.62

    You have added a Discontinued Item.

    Please keep in mind the inventory quantity listed on discontinued items is not always accurate and these items may be out of stock at any time.

    Certain items may not be supported by the manufacturer and warranties could be limited.

    Contact Agron Customer Support for additional questions.

    support@agron.io
    877.812.4766

    Don't show this message again, I know 'Discontinued Items'.

    You recently viewed

    Clear recently viewed
    Loading…