Total Grow Control Peristaltic Pump

by Hydrofarm

      3-5 Day Lead Time

      Total Grow Control Peristaltic Pump

      Chemical solution and slurry metering pumps designed, engineered, and built to last. The pump case is molded of a rugged, chemical resistant ABS. Mounting pads and a built-in wall mounting bracket allow a choice of flat surface or wall mounted installation.
      The thermal or impedance protected gear motor is safe, quiet and dependable. All metal gearing parts are heat-treated and the output shaft is supported by heavy-duty bearings.
      The feeder head is molded of UV and acid resistant polycarbonate and is designed to snap on and off without tools.
      A 10-minute solid-state electric current interrupter is a standard feature, built into every MEC-OMATIC Dolphin Series pump.
      Technical Specs
      • Item: Chemical Metering Pumps 
      • Chemical Metering Pump Type Peristaltic 
      • Max. Flow (gpd): Pumps 60.00 gpd 
      • Max. Pressure: Pumps 25 psi 
      • Voltage: Pumps 115VAC 
      • Max. Viscosity: Pumps 300 cP 
      • HP: Pumps 1/60 
      • Phase: Pumps 1 
      • Flow Rate Output Control Adjustable 
      • Tubing Material: Peristaltic Pumps Norprene 
      • Turn Down Ratio: Pumps 10:1 
      • Reproducibility: Pumps +/-2.0% 
      • Self-Priming: Yes 
      • Suction Lift 24 ft. 
      • Head and Fitting Material: Pumps Resin 
      • Body Material Polycarbonate 
      • Motor RPM 50 
      • Height 5-5/8" 
      • Length 7-5/8" 
      • Width 6-7/8" 
      • Number of Feeds 1 
      • Cord Length 6 ft. 
      • Min. Flow Rate 6 gpd 
      • cc/Min. 157.6 
      • Max. Strokes per Minute 50 
      • Hz 60 
      • Standards ETL, cETL, ETL Sanitary 
      • Features valve-less, non-clogging design

      • Feed rates from 13 gpd (2.05 lph) to 97 gpd (15.3 lph) at 25 psi (1.72 bar).
      • Pump case is molded chemical resistant ABS. 
      • Thermal or impedance protected gearmotor is safe, quiet and dependable. 
      • All metal gearing parts are heat-treated. 
      • Output shaft is supported by heavy duty bearings. 
      Operating Benefits 
      • Quick-release, twist-off, clear polycarbonate, acid resistant head.   
      • Self-lubricating chemical resistant roller assembly.  
      • Durable, long-lasting tubing with no tube adjustment.  
      • Heavy duty shaded pole gearmotor with lifetime lubrication.
      Engineering Data
      • Pump Head Materials: Chemical Resistant Resin 
      • Pump Head Tubing: Synthetic Rubber 
      • Injection Fitting (standard w/check valve): PVC 
      • Strainer: FPP 
      • Tubing: PE
      • Pump Housing:   Chemical Resistant Resin
      • Important: Material Code - PVC=Polyvinyl Chloride, PE=Polyethylene.
      • Power Input: 115 VAC/60 HZ

      You recently viewed

      Clear recently viewed