SKU:

Hanna HI1285-6 PH/EC/TDS MULTIPARAMETER PROBE FOR HI9813-6N

Note: Not GroLine & does not work on any GroLine meters. See HI1285-7 for the GroLine Combo Meter's replacement probe. 

he HI1285-6 is designed for use with HI9813-6 Portable pH/EC/TDS/Temperature Meter with CAL Check™.

  • 3 in 1 probe with pH, conductivity (EC), TDS (ppm), & temperature sensors.
  • Pre-amplified for more accurate readings.
  • Great for hydroponics, aquariums, pools, & ponds.

DETAILS

Hanna Instruments offers a wide variety of electrodes that are designed for many different applications. The sensing material, body material, and connection type used are just some of the design considerations.

Pre-Amplified Multiparameter pH Probe

The pH electrode circuit has a built-in amplifier that serves to reduce the effects of electrical noise on the high impedance pH measurement. Electrical noise can come from motors and pumps that are common in greenhouses. The single reference junction design of the pH electrode has a cloth junction that allows ion movement between the inner gel electrolyte and the sample being measured. The advantage of the cloth junction is that it can be extracted from the probe, exposing a fresh surface when readings become drifty or erratic. These features make this probe ideal for use in fertilizer solutions.



Amperometric EC/TDS Sensor

EC/TDS readings are performed by a two-pin amperometric sensor. An alternating voltage is applied to the sensor and the amount of current that passes between the two stainless steel pins determines the amount of dissolved ionic solids present.



Built-In Temperature Sensor

pH and EC/TDS readings must be temperature compensated in order to obtain accurate results. The built-in temperature sensor of the HI1285-6 provides a speedy temperature reading which is then used to adjust the pH and EC/TDS results accordingly.



Polypropylene Body

The polypropylene body of the HI1285-6 multiparameter pH probe houses all three sensors within a sturdy, single body design. This body material is suitable for a wide range of applications and excels in measurements with portable meters due to its durability. The fins around the spherical glass pH bulb minimizes breakage due to accidental bumping or dropping of the electrode. The polypropylene plastic is a high-quality plastic that is chemically resistant to many aggressive chemicals.



DIN Connector with CAL Check

The HI1285-6 uses a DIN connector. This type of connector is generally proprietary to the meters they are supplied with and may not be interchangeable. The connection of the HI1285-6 enables the CAL Check function on the HI9813-6 portable multiparameter meter.

SPECIFICATIONS

Body Material

polypropylene

Reference

single, Ag/AgCl

Junction / Flow Rate

cloth

Electrolyte

gel

Range

pH: 0 to 13, EC

Max Pressure

0.1 bar

Tip Shape

spheric (8 mm)

Diameter

16 mm

Body Length / Overall Length

95 mm / 185 mm

Recommended Operating Temperature

0 to 50°C (32 to 122°F) - LT

Temperature Sensor

yes

Matching Pin

no

Amplifier

yes

Digital

no

Cable

7-pole; 1 m (3.3')

Connection

DIN

Warranty

6 months

$100.00

    You have added a Discontinued Item.

    Please keep in mind the inventory quantity listed on discontinued items is not always accurate and these items may be out of stock at any time.

    Certain items may not be supported by the manufacturer and warranties could be limited.

    Contact Agron Customer Support for additional questions.

    support@agron.io
    877.812.4766

    Don't show this message again, I know 'Discontinued Items'.

    You recently viewed

    Clear recently viewed
    Loading…