EZ-Clone Product Line

Blog

EZ-Clone Product Line

EZ-Clone has designed products with the needs of the grower community in mind. By constantly striving to innovate the way we grow our plants, EZ-Clone has contributed to the education of sustainable growing practices within the cannabis industry. 


Their commitment to successful, sustainable growing operations is fully apparent within their wide range of products that are detailed below:


EZ-Clone Pro Commercial Unit

The EZ-Clone Commercial Pro System offers the newest technology on the market to professional growers. The Pro System includes cutting edge innovation in precision aeroponic propagation, resulting in a unit that was designed for full-time, year-round productions.


With retail prices beginning at $7,999 USD, the EZ-Clone Pro Commercial Unit offers the following features: 

  • Cloning Sites – 459 Total Cuttings
  • Total Power Consumption – 5.1 Amps / 612 Watts
  • Physical Dimensions – L 50”x D 30”x H 78” Powder Coated Steel
  • Frame dimensions that are designed to roll through any standard size door
  • Space Conscious- The system utilizes less than 10 Square Feet of space.
  • Heavy-duty Roller Castors allow for easy mobility. 
  • Each shelf includes individual sliding drawers that open for easy access to cuttings.
  • Single watertight electrical box houses all components in one location.
  • Only requires a single (1) Standard 120V Electrical Cord.
  • Custom 19 Gallon Reservoir with Moulded Handles. Includes drains on both the long and short side of the reservoir.
  • 30 Micron Water Filter, easily changed by hand.
  • Outboard Water Pump that includes individual Motor and Pump Head.
  • Motor uses 4.2 Amps / 500 Watts. Comes pre-set from the factory at 75 PSI.
  • High Pressure Tubing is routed snuggly and safely inside the Frame Rails. 
  • All fittings are leak-proof.
  • Custom Fogger Heads from Senninger are secured to the bottom of each Catch Tray, producing a 65 Micron Droplet at 75 PSI.
  •  Foggers are simple to disassemble for inspection and cleaning needs.
  • System is fully fitted with Light Reflectors, each containing two T5 Bulbs, individually producing 21 Watts & 6500 Kelvin.
  • Each light has its own On/Off Switch.
  • Frame houses two timers. One timer is for the water pump, allowing you to customize your Aeroponic On/Off Cycle. The second timer controls your lighting cycle. The pump timer is pre-set at 1 minute on/ 4 minutes off.
  • Total system power consumption for a 1 minute on / 4 minute off cycle time. This adds up to 4.8 hours per day (operating at 5.1 amp – 612 watts) based on a .20c perKw/Hr rate.
  •  The daily use cost estimate is approximately $1/day.
  • System omits 2,088 BTU/HR based on factory settings & recommended use. 
  • 369 BTU/HR omitted using lights alone.

EZ-Clone Small Systems Products

EZ-Clone offers three different small system products: the 9, 16, and 32 systems. The recent introduction of the 16 and 32 Site Low Pro Systems includes various upgrades to previous models.


The 16 and 32 systems offer a reduction in the overall height as well as an increase in the structural integrity of the new proprietary lid and reservoir. Manufactured from durable UV-protected HDPE, the smaller systems utilize the same Aeroponic Misting Technology as all of the larger system products. 


The lid features alpha-numeric symbols formed directly into the plastic, allowing for easy identification of multiple strains of cuttings. The lid also comes with four-way finger slots to improve Cloning Collar extraction.


The reservoir features an increased lip height, extended flange and drainage gutters, and an improved leak-proof design. 


The smaller systems are recommended for cloning a variety of plants in small areas.


Small System 9

L: 10.25” W: 10.25” H: 11.75”

L: 26.06cm W: 26.06cm H: 29.85cm


Small System 16

L: 14.31” W: 14.75” H: 12.38”

L: 36.35cm W: 37.47cm H: 31.43cm


Small System 32

L: 24.00” W: 14.75” H: 12.38”

L: 60.96cm W: 37.47cm H: 31.43cm


EZ-Clone Large Systems Products

In addition to the newly improved smaller systems, EZ-Clone has recently released updated versions of the Low Pro 64 and 128 Cloning Systems. 


After heavily developing each aspect of the Aeroponic Cloning System, EZ-Clone has confidently produced one of the most effective and user-friendly cloning systems on the market. Despite reducing the overall height by four inches, the structural integrity of both the lid and reservoir have been increased. 


Both large systems products are available in black and white and are manufactured using durable UV-protected HDPE plastic. 


The lid features alpha-numeric symbols formed directly into the plastic, allowing for easy identification of multiple strains of cuttings. The lid also comes with four-way finger slots to improve Cloning Collar extraction.


The reservoir features an increased lip height, extended flange and drainage gutters, and an improved leak-proof design. It is also easier to open the system to view cuttings now, as well. 


The water pump features an extended base plate and additional suction cups for added security. The large systems also include four individual Colored Cloning Collars.


EZ-Clone 64

Available in black and white.

MSRP- $349.95


EZ-Clone 128

Available in black and white.

MSRP- $459.95

Loading…